Elitegroup EZ-Buddie2 D21 I4-3 Install v.2 User Manual download pdf

Using your PC

How to Turn on your PC?

1. You can find in the middle part of the front panel two buttons, the one on the right is the

power button and the left is the reset button, and three tuners, and in the lower part of the

panel six buttons and one tuner. You can also find the CD-ROM disk button on the upper

right corner. Just a press on the power button, the system will turn on and start the boot

sequence.

The Installation of Operation System (Optional)

Installation Notes:

1. There are many kinds of operation systems (OS). The most OS is Windows manufactured by Microsoft. Other

choices include Linux OS. Each operation system has a different installation procedure. This manual does not list all

of them. Please refer to the instructions listed in the manual of the operation system purchased.

2. Since no OS is able to provide a complete set of drivers for all peripherals, this PC comes with a driver program CD

for Windows OSs. Once installation of Windows is completed, please insert this CD into the Optical Device Drive and

then the driver program will auto run. Next, the following menu will appear. Please use the mouse to click “Setup,”

and the driver program will start the installation process automatically. During this process, the system will shut off

and on. This is normal. Please follow the instructions shown to complete the installation of all drivers.

How to Use the Card Reader?

1. This PC has a built in 6-in-one card reader that can read CF Card Type I/II, Smart Card, SD Card, Memory Stick, and

MMC Card.

2. Unless your operation system is Windows 98 or older, your PC should be able to operate this card reader without

installing any driver.

3. You can find the corresponding card slots on the right and left side of the main body.

4. All memory cards are handled in the way of inserting and pulling out.

5. This card reader is plug & play, allowing you to insert memory cards at any time and access the cards immediately. In

addition, you can take out the memory cards at any time after reading and writing data to the cards. There is no need

to turn the computer on and off.

Push the button to

start the program

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Using your PC

1 Using your PC How to Turn on your PC? 1. You can find in the middle part of the front panel two buttons, the one on the right is the power butto

Page 2 - How to Use EZ-Watcher?

2 How to Use the Front I/O Panel? There are two USB ports on the right side of the panel, and one 1394 port, earphone plug, and microphone plug

Page 3 - Enabling EZ-Watcher

3 Enabling EZ-Watcher If you are not familiar with a PC and its operation, you may accidentally lose all data in the PC by using the Magic Tuner

Page 4

4 3. Press ‘PgUp’ or ‘PgDn’ on your keyboard to change the ”EZ-Watcher Clock adjust” to “Enabled” 4. Press ‘Esc’ on your keybo

Page 5

5 How to use the EZ-Watcher/Magic Tuner When the PC is booting, EZ-Watcher starts at the simultaneously and conducts POST to show the POST results

Page 6

6 Fig 8 The temperatures Fig 9 The temperature Fig 10 The temperatures Slightly High

Page 7

7 4. We do not encourage you to overclock the CPU for a long-time usage. Please overclock the CPU based on your needs. Now, you are ready to

Page 8 - Special Notes:

8 For keeping users from improperly overclocking this system and protecting the CPU, The overclock ranges allowed with the Intel, AMD, and VIA C

Comments to this Manuals

No comments

Elitegroup EZ-Buddie2 D21 I4-3 Install v.2 User Manual

Browse online or download User Manual for Multimedia Elitegroup EZ-Buddie2 D21 I4-3 Install v.2. Elitegroup EZ-Buddie2 D21 I4-3 Install v.2 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Multimedia Elitegroup EZ-Buddie2 D21 I4-3 Install v.2